Cut-Griffy HS 760 Series

The Schnitt-Griffy models of the HS 760 series are suitable for mini excavators from 5 t to 12 t and can also be mounted on other carrier vehicles with powerful booms. A minimum lifting capacity of 850 kg for the HS 760 and a minimum lifting capacity of 900 kg for the HS 760 SE when extended should be available. The performance of the Schnitt-Griffy depends on the base machine and the local conditions.

Wheeled or tracked excavators have proven particularly effective.

The Schnitt-Griffy HS 76 0 SE is equipped with a swivel unit as standard. With a swivel angle of 2 x 55°, branches can be cut precisely and the cuttings can be deposited lengthwise next to the excavator.

The Schnitt-Griffy is also available without a swivel unit.

Areas of application: On roads, along rivers, in forests, for landscape maintenance, for pollarded willows, on railway lines, for overhead power lines, and much more.

Furthermore, a load-holding valve can be ordered as an optional extra at the time of purchase or retrofitted to your existing Griffy cutter .

Only a double-acting control unit with appropriate connecting lines to the end of the boom is required for the hydraulic connection. The control valve must be leak-tight and have primary and secondary pressure relief. Two double-acting control units are required for the Griffy cutter with a swivel unit.

Upon request, this unit can be equipped for an oil pressure of 200–220 bar.

Subject to technical changes.